|
HS-3
Humidity Sensor
The
HS-1 provides accurate and reliable humidity measurement when used in
conjunction with the EPC-50/32 Control Unit. It will cause the control
unit to annunciate an alarm when the humidity either rises or falls outside
of preset (user programmable) limits. The HS-1 transmitter circuit converts
the relative humidity measurement from an advanced macroresistive polymer
sensor into an electronic signal that can be processed by the control
unit. The signal is directly proportional to 0 100% RH. Although this
sensor is factory calibrated to an accuracy of +/-3%, other sensors of
2% or 1% accuracy are also available.
Sensor Range:
0 to 100%
Accuracy:
3% accuracy from 20 to 95% RH
Stability:
+/- 1.0% RH drift/year
Sensor:
Interchangeability +/- 5% RH. Time Constant: 45 sec. 30 to 80% RH. Operating
Temperature. Range: 32 to 150 degrees F (0 to 65.56C)
Mounting:
Direct mounting to block or drywall, 5' above the floor
Dimensions:
Height: 4.7" (119.4mm)
Width: 2.75" (69.9mm)
Depth: 1.75" (44.5mm)
TH-1/3
Temperature/Humidity Sensor
Combination Temperature and Humidity Sensor consisting of the TS-1 and
HS-3 sensors co-housed in the HS-3 housing assembly
|
